DEEP-FREEZER AND STORAGE RANGE
page 23 out of 37
3.6.2
Introduction of the Bi-tronic Control interface
This interface has the following form:
1
Compressor indicator
7
Deep freezing key :
Time
2
Ventilator indicator
8
Deep freezing key :
Probe
3
Defrostring indicator
9
Incrementation key :
Plus
4
Alarm indicator
10 Modification save key :
Validation
5
Readout of temperature inside freezer
11 Incrementation key :
Minus
6
Digital readout
12 Controller start-up key :
On/Off
Attention, the On/Off key puts the regulator in standby.
It doesn’t turn of at all the machine. For that,
it is imperatively necessary to cut the disconnecting switch located on the electric box.
3.6.3 Technician Parameters Bi-tronic Control regulation
The technical parameters are adjusted in the factory and ensure a good operation of the machine.
A parameter change request then a monitoring of the equipment.
The technical settings are only accessible starting from the
STORAGE
mode :
01/06/04 10 : 14
STORAGE
Press simultaneously on the
Plus
and
Minus
keys:
and
during five seconds until
obtaining:
Technical
Settings
Validate with
Validation
key:
The display indicates:
Technical Settings
Tech. Code ? 000