9
V. Cord storage box
1. Put the power cord into the storage box when not use
the machine which is in the back of the machine. Do not
wrap the cord around the appliance.
GENERAL SAFETY AND ACCIDENT PREVENTION
1. Do not touch the machine with wet hands.
2. Do not touch the machine when barefoot.
3. In case of breakdown or malfunction, switch off the machine and unplug it.
4. Do not leave the machine exposed to atmospheric agents & put it in water.
5. Always unplug the machine before carrying out any operation other than vacuum packing.
6. Switch the machine off and unplug it when not used.
7. Do not pull the power cord to unplug the machine.
8. Frequently check the condition of the power cord. If necessary have it replaced by only an
authorized Technical Assistance Centre.
9. In case of repair or replacing parts, only use original spare parts.
10. In case of incompatibility between the power plug and your socket, have it replaced by an
authorized Technical Assistance Centre.
Important! Before cleaning, make sure to disconnect the appliance from the electrical outlet
and let it cool down completely.
Storing Your Vacuum Sealer:
1. Keep the unit in a flat and safe place, out of the reach of children.
2. Do remember to make sure the lid of appliance is unlocked when not in use and in storage.
Keep the cover locked will distort the foam gaskets causing leaking.
3. Unplug the machine before cleaning it or carrying out any maintenance work.
4. For any repairs,if possible contact an authorized Technical Assistance Centre.
5. Only use manufacturer original spare parts.
Note: The foam gaskets around the vacuum chamber should be dried thoroughly before re-as-
sembling, when re-assembling, is careful to prevent any damage, and assemble as original po-
sition to ensure no vacuum leaking.
IMPORTANT: To avoid possible illness, do not reuse bags after storing raw meats, raw fish or
greasy foods. Do not reuse bags that have been microwaved or boiled.
TROUBLE SHOOTING
Nothing happens when I try to vacuum package
1. Check power cord to see if it is firmly plugged into electrical outlet.
2. Check switch to see if it’s setting is “o”.
3. Examine power cord for any damages.
4. See if electrical outlet is operative by plugging in another appliance.
5. Twist the Fuse Cap off, then look at the clear tube to see if the Fuse is darkened. If the Fuse is
darkened, it will need to be replaced with a standard 10-amp Buss Fuse.
6. If your appliance has a mode switch, make sure it is set to the correct mode. Refer to the
above operating instructions.
7. Make sure bag is placed correctly inside Vacuum chamber and beneath the air intake.
EN
