11
Technical Specification
Operating voltage: 220-240V~ 50Hz
Power consumption: 350W
Protection class: class I
Technical specification is subjected to change without prior notice.
DISPOSAL OF THE DEVICE
PROTECTION OF THE ENVIRONMENT
At the end of the life of your product, it should go to a specially adapted waste-recycling centre.
ENVIRONMENT PROTECTION FIRST
1. The symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it should be handed over to the applicable. Collection point for
the recycling of electrical and electronic equipment.
2. By ensuring this product is disposed of correctly, you will help prevent potential negative con-
sequences for the environment and human health, which could otherwise be caused by in-
appropriate waste handling of this product. For more detailed information about the recycling
of this product, please contact your local council office or your household waste disposal
service.
WIRING INSTRUCTIONS – FOR U.K.ONLY.
SAFETY NOTES – FOR REWIREABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS 1363 13 A plug. Should the fuse
need to be replaced, a 13 A ASTA approved BS 1362 fuse must be used.
If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is
a molded on plug) and an appropriate one fitted. Warning: dispose of a plug that has been cut
from the power supply cord, as such a plug is hazardous if inserted in a live 13 A socket outlet
elsewhere in the house.
Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the cover is omit-
ted or lost until a replacement is obtained – make certain that only the correct fuse cover is used
and fitted.
For plugs with a detachable fuse cover the replacement must be the same as the color insert in
the base of the plug, or as directly by the embossed wording on the base of the plug.
U.K. ONLY – FITTING A PLUG
Important:
the wires in this lead are colored in accordance with the following codes Blue, Neu-
tral, Brown, live. Please read the instructions given below before connecting the cord to a plug. If
in doubt, please consult a qualified electrician.
As the colors of the wires in the mains lead of this appliance may not correspond with the colored
marking identifying the terminals in your plug, proceed as follows:
·the wire which is colored BLUE must be connected to the terminal which is marked with the
letter “N” or colored BLACK
·the wire which is colored BROWN must be connected to the terminal which is marked with the
letter “L” or colored RED.
Neither core is to be connected to the earth terminal of a three-pin plug.
This appliance requires a 3 fuse ASTA approved to BS 1362.
EN
