13
EN
SEE INSERT FOR SPECIFIC INFORMATION ABOUT YOUR NEW DISPOSER
NOTE:
This Food Waste Disposer has been designed to operate with your appropriate household
current exclusively. Using any other voltage or Hz adversely affects performance.
IMPORTANT: Read all instructions thoroughly. Keep this guide for future reference.
CAUTION:
Be sure to review SAFETY INSTRUCTIONS FIRST PERTAINING TO A RISK OF FIRE, ELECTRICAL
SHOCK OR INJURY TO PERSONS before using disposer.
RECORD IMPORTANT DISPOSER INFORMATION HERE
* Above information appears on the label affixed to bottom of the disposer. For your convenience, write
down the model and serial numbers prior to installation.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS. SAVE
THESE INSTRUCTIONS.
WARNING – When using electrical appliances, basic precautions should always be followed, including
the following:
• Read all instructions before using the appliance.
• To reduce the risk of injury, close supervision is neces-
sary when an appliance is used near children.
• Do not put fingers or hands into a waste disposer.
• Turn the power switch to the off position before at-
tempting to clear a jam or remove an object from the
disposer.
• When attempting to loosen a jam in a waste disposer,
use a long wooden object such as a wooden spoon or
the wooden handle of a broom or mop.
• When attempting to remove objects from a waste dis-
poser use long-handled tongs or pliers. If the disposer
is magnetically actuated, non-magnetic tools should
• To reduce the risk of injury by materials that may be
expelled by a waste disposer, do not put the following
into a disposer: clam or oyster shells; caustic drain
cleaners or similar products; glass, china or plastic;
large whole bones; metal, such as bottle caps, tin
cans, aluminum foil or utensils; hot grease or other
hot liquids; whole cornhusks.
• When not operating a disposer, leave the stopper in
place to reduce the risk of objects falling into the disposer.
• DO NOT operate disposer unless splash guard is in
place.
• For proper grounding instructions see the ELECTRICAL
CONNECTION portion of this manual.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or authorized
person in order to avoid hazard.
Model Number*
Serial Number*
