Hendi 297377, User Manual

Page: 3 / 24

3
EN
Dear Customer,
Before using the appliance for the first time, please read this manual carefully, paying particular attention
to the safety regulations outlined below.
1. Important safety instructions
• The sealing bar can reach high temperatures during and after the employment.
Therefore we urge you to beware and to avoid a direct contact until the indicated part
isn’t completely cooled.
• All machines can activate the sealing bar even if the lid is open, with all the related
thermic risks.
• The machine is to be used in inner environments only.
• The device must not be opened by the end user. Should the power wire be damaged, or
in case of electric repairs, they must be replaced by the manufacturer or by its technical
assistance or by a person with similar skills, in order to avoid any risk.
• The machine is supplied with ground protection wire.
• Read and follow these instructions before using the machine and keep them with it.
• Keep the environment and working place clean and tidy.
• Keep children away from the working place where the machine is placed.
• Do not overload the machine and take care of it.
• Place the machine on a stable and safe surface. Should it fall down, it can be seriously
damaged.
• Do not vacuum pack liquids, nor powders. The lack of respect for this indication causes
unsafe conditions and the irreparable damage of the machine.
• In order to vacuum food with liquid substances, remove all exceeding liquid and dry the
food with a rag before packing it; alternatively, use a container with the proper vacuum lid,
supplied by the manufacturer.
• Before starting, remove all extra material (knives, blades, tools…) away from the sealing
bar.
• Any kind of operation, either for cleaning or fi tting, must be done with the machine off
and the power wire unplugged from the socket, in order to avoid any risk of involuntary
start-up of the machine itself. Follow this rule even when the machine is not working.
Check that tension and frequency correspond to those indicated on the machine and that
the socket is proportioned to the electricity absorbed by the machine.
• Use exclusively original spare parts and accessories.
• Do not immerse nor expose the machine to water. It is an electrical device!
• Do not pull the electric wire to remove the plug.
• Replacement of the power cable and all electric replacements must be carried out by
specialized staff exclusively.