Hendi 281376, Manual

Page: 8 / 265

8
EN
50%/60%/70%/80%/90%/100%). The display will
show the selected power. If you press again the
same power level button, the power will be back to
set 100% power. Also, if no power level button is set,
the power will be default to 100%. After setting the
time, power and press the ‘start’ button to safe the
program. The display will show ‘PROGRAM’. Close
the door to return to ‘ready mode’. If you want to
cancel during programming, press the ‘pause’ but-
ton and the oven will return to the ‘door open’ mode
and the program won’t be saved.
Below a quick guide how to make a program of 1.25
minutes at 70% power:
1) Open the door and press number button ‘1’ for
about 4 ~ 6 seconds, display will show ‘PRO-
GRAM’.
2) Press number button ‘3’, display shows P:03.
After 2 seconds the display will show the time
related with the program ‘:30’.
3) Press the number buttons ‘1’ ‘2’ ‘5’ to set the
cooking time.
4) Press ‘ ’, and choose 7 on the number key-
board for power level 70%. The display will show
‘1:25 70’.
5) Press the ‘ ’ button. The program is now saved
under number keyboard ‘3’.
To overwrite the program repeat the steps above.
Note: Total programming time is limited to 60 min-
utes only.
Note: When the cooking time exceeds the max-
imum time the microwave can operate (standard
60 minutes) three beeps will be sound. This means
you need to adjust the time before the program can
work.
Double and triple quantity (X2 or X3)
This microwave is equipped with a function to cal-
culate the amount of time needed when preparing
a double or triple quantity of food. Press the ‘X2’
or ‘X3’ button followed by the program and the mi- crowave double or triple the time you preset and
start the process. This function can only be used in
combination with a preset program.
Multi stage cooking
This function can be used during manual entry or
programming. The maximum number of stages is
3. To use this function first follow the steps under
‘
Manual entry ’. After setting the time and power of
the first stage press ‘ ’ again, the display shows
‘STAGE-2’, now input the desired time and power.
If a third stage is needed, press ‘
’ once more,
the display will show ‘STAGE-3’, and input the de-
sired time and power. Now press the ‘start’ button
to start the microwave. Multi stage input is set in a
same manner while in programming mode. Bellow
an example of how this could work:
1) Open the door and press and hold “1” on the
number keyboard for 4 ~ 6 seconds, display will
show ‘PROGRAM.
2) Press number button ‘3’, display shows P:03.
After 2 seconds the display will show the time
related with the program (standard ‘:30’).
3) Press the number buttons ‘1’ ‘2’ ‘5’ to set the
cooking time.
4) Press power , and choose 7 on the number
keyboard for power level 70%. The display will
show ‘1:25 70’.”
5) To set the second stage press ‘ ’ for but-
ton 2- time entry button., the display will show
‘STAGE-2’.
6) Press the number buttons ‘3’ ‘3’ ‘0’ to input the
time.
7) Press , and choose 5 on the number keyboard
for power level 50%. The display will show ‘3:30
50’.
8) Press the ‘ ’ for button 5. The multi stage pro-
gram is now saved under number keyboard ‘3’.
Note: Total cooking time is limited to 60 minutes
only.
Note: When multi stage cooking is active the micro-
wave shows the total time remaining of all stages.