Hendi 281376, Manual

Page: 11 / 265

11
EN
Click ‘Export File’ to export the file to the USB card. The file must be named ‘Utable.c’. Click ‘save’ to finish
the export.
Insert the USB card in the right side panel of the microwave and press the ‘ ’ button. Display will now show
‘LOADING’. If the update is succesfull the display will show ‘SUCCESS’, if it failed to load the programs it will
show ‘FAIL’.
Remarks for using USB card:
1) Small parts, choking hazard.
2) Please wait few seconds or more between plug-
ging in and unplugging the USB card.
3) Do not unplug the USB card while in use or pro-
cessing.
4) Other USB stick may not compatible with & may
destroy the appliance.
Return to factory settings
To return the microwave back to the factory set-
tings press and hold the ‘play’ and ‘0’ button until
the buzzer sounds, the display will show ‘CHECK’.
When the microwave restored the factory set-
tings the display will show ‘11’. If returning to the factory settings failed the display will show ‘00’,
press ‘play’ button and the display will now show
‘CLEAR’ and the buzzer will sound once, after a
check the display will either show ‘11’ or ‘00’.
User options
This microwave allows the user to change some op-
tions. To change first start by opening the door and
press ‘2’ for 5 seconds, the display will show ‘OP:--
‘. Press the number button related with what needs
to be changed, for example ‘2’. Now the display
shows ‘OP:22’, keep pressing ‘2’ until the desired
setting is displayd ‘OP:20’/’OP:21’/’OP:22’/’OP:23’ (it cycles trough these options). To set the desired
setting press ‘start’. Now the change is saved. Dur-
ing changing the options you can cancel this by
pressing ‘pause’. The change won’t be saved and
the microwave will return to ‘door open mode’.
Bellow an list of the options that can be changes,
bold printed items are the preset options.