Hendi 239438, Manual

Page: 8 / 72

8
EN
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the heating surface
during storage as it may crack it.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider. • Error codes shown on the digital display (3). (See
--> Error codes display)
Problems Possible cause Possible solution
The appliance does not switch ON.
- Power plug is not connected proper-
ly with the electrical outlet.
- On/Standby (1) button is not pressed.
- Check the power plug to make sure
it is connected properly.
- Press the On/Standby (1) button to
start operation.
Cooling fan is operating even after
the appliance is switched to Standby
mode.
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
- Wait until the cooling fan stops ro-
tating.
Technical specification
Item no. 239438
Operating voltage and frequency 220-240V~ 50 / 60 Hz
Rated input power 3500W
Power setting 100W ~ 1,700W for front; 100W ~ 1,800W for rear
Temperature setting 35°C ~ 240°C
Timer setting 0 min ~ 180 min
Protection class Class I
Dimension 300 x 580 x (H) 64 mm
Remark: Technical specification is subjected to change without prior notification.