Hendi 239438, Manual

Page: 5 / 72

5
EN
• Do not place empty cookware on the appliance during operation as this may damage the
cookware.
• Only use the cookware of the type and size recommended. (See ---> Suitable cooking
equipment).
Intended use
• This appliance is intended for buffet and house-
hold use.
• The appliance is designed only for cooking a vari-
ety of food via heating the suitable cookware. Any
other use may lead to damage to the appliance or
personal injury.
• Operating the appliance for any other purpose
shall be deemed as a misuse of the device. The
user shall be solely liable for improper use of the
device.
Grounding installation
This appliance is classified as
protection class
I and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
This appliance is fitted with a power cord that has a
grounding wire and grounded plug. The plug must
be plugged into an outlet that is properly installed
and grounded.
Touch control panel of the appliance
1) On/Standby button with indicator light
2) Increase setting: Time / Temperature / Power
3) Digital display
4) Decrease setting: Time / Temperature / Power 5) Temperature setting with indicator light
6) Power setting with indicator light
7) Timer function with indicator light
Preparations before using for the first time
• Remove all protective packaging and wrapping.
• Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages.
Please contact supplier (See ==> Warranty).
• Clean the appliance before use (See ==> Cleaning
and Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.
• Ensure that there is sufficient ventilation. Keep a
minimum distance of 15 cm around the appliance.
• Do not place the appliance in close proximity to
devices which are sensitive to disturbances by
magnetic sources (e.g. radios, tape decks).
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.