4
EN
• Never use accessories other than those recommended by the manufacturer. Failure to do
so could pose a safety risk to the user and could damage the appliance. Only use original
parts and accessories.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
• This appliance must not be used by children under any circumstances.
• Keep the appliance and its cord out of reach of children.
• Always disconnect the appliance from the mains if it is left unattended or is not in use,
and before assembly, disassembly or cleaning.
• Never leave the appliance unattended during use.
How your water softener works
Hard water flows to your household with a mains
pipe. It reaches the softener and flows through a
deposit of ion exchange resin which softens water.
At that time ion exchange process occurs, in the
course of which calcium and magnesium ions re-
sponsible for the hardness of water are captured by
the ion exchange resin and replaced with sodium
ions that dissolve well in water. Successively, sof-
tened water is delivered to the installation system
in your household.
A device programmed individually for your wa-
ter measures the quantity of water which flows
through. As soon as the exchange capacity of the
resin is reached, the device automatically (230459)
or semi-automatically (230442) carries out re-
generation of the resin with pre-prepared brine
(salt dissolved in water, stored in a brine tank). In
the course of regeneration, the device will draw a
programmed quantity of brine to the tank with ion
exchange resin. As a result, reverse-cycle ion ex-
change will occur.
The ion exchange resin will be “charged” with
sodium ions from salt, as well as will release the
previously captured ions of calcium and magne-
sium that, together with the rest of brine, will be
drained to sewage. After the regeneration process
is done, the device regains its ion exchange capa-
bilities and can soften water further. The process
of ion exchange allows to utilize the water softener
for a long period, whereas the regeneration of ion
exchange resin can be done multiple times, thanks
to which the expensive resin does not have to be
replaced. The only thing to be done is to refill salt
in the tank.
Contents
Description
Quantity
Softener body
1 unit
100 - 240 VAC voltage transformer
1 unit
2.5” wrench for the head flange
1 pc.
3/4” connector
2 pcs
3/4” seal
2 pcs
Worm drive hose clip
1 pc.
Non-collapsible hose
1 running metre
