7
EN
Connecting the gas bottle
1 = Main tap
2 = Pressure regulator
3 = Gas hose
4 = Gas Bottle
5 = Rubber washer
Attach the pressure regulator to the gas bottle
using the large brass nut. Always ensure that the
rubber-sealing washer is present in the nut. (NB.
This rubber washer is not required for UK-type
pressure regulators). Tighten the nut well. Note
that the nut has a left-hand thread.
Check the connections for leaks using a soap and
water solution.
Every time a newly filled gas bottle is connected, a
new rubber washer must be fitted. In most cases,
your gas supplier will include it with the bottle.
Instructions for use
Ignition:
• Place the grill grid.
• Turn the knob to the “normal” position. keep the
knob pressed and press the ignition button a
few times until the burner is burning complete-
ly. Keep the knob pressed in for approximately
a further 10 seconds. The burner will continue
to burn.
Extinguishing:
• Turn the knob completely to the right. The burner
will go out.
• Note! After turning off the burners, wait approxi-
mately 10 minutes before reigniting the burners.
•
After turning off the burners, always turn off the
main tap on the gas cylinder!
Instructions for converting Hokker 147108 from propane to natural gas and from natural gas to propane
ATTENTION! Only let a certified installer perform the conversion. Conversion kit 147184 needed, available
seperatley. (Only suitable for DE/PL/LU/AT/CH/IT/HU/GB/IE/GR/BE/FR)
1
Use key number 7 to unscrew the
bolts and fastening of the ther-
mocouple (red arrow) and pull
the plug wire from the igniter(yel-
low arrow).
Summary of Contents for 147108
