background image

Henden 3 Speed Pump Owners Manual

DANGER Hazardous suction. Do 
not block water entry into filtration 
system with any part of your body 
as the pressure can trap hair or body 
parts, causing severe injury or death. 
Do not block suction.

Turn off pump immediately if 
someone becomes trapped.

CAUTION! Do not add chemicals
directly to the pool skimmer. Adding
concentrated chemicals may damage
pump and filter and void warranty.

WARNING! Pump suction is 
hazardous and can trap and drown 
or disembowel bathers. Do not 
block suction. Do not use or operate 
swimming pools, spas or spa baths if 
a suction cover is broken, missing or 
loose. Two suction covers and inlets 
must be provided into every pump to 
avoid suction entrapment.

CAUTION! In accordance with AS/
NZS60335.2.41 we are obliged to 
inform you that this device is not 
to be used by children or infirm 
persons and must not be used as a 
toy by children.

WARNING! POWER CONNECTIONS 
AND WIRING MUST BE CARRIED OUT 
BY AN AUTHORISED ELECTRICIAN.

10

 

|

 

HENDEN

 INSTALLATION & OWNERS MANUAL

Routine Maintenance tasks –  
to maximise the life of your pool equipment & personal 
safety, use this checklist once a week. 
Turn pump off first.

£

 Make sure that any pressure gauges are in working 

condition and the operating pressure is within limits 
as specified on the product.

£

 Make sure that each suction inlet, and main drain has 

a cover that is securely attached and in safe working 
condition.

£

 Make sure that all skimmer covers are securely 

attached and in safe working condition. These should 
be replaced every 3 to 4 years.

£

 Remove any obstructions or debris from the main 

drain cover.

£

 Ensure the skimmer baskets and the pump hair and 

lint pots are free of leaves and debris at least once a 
week.

£

 Remove obstructions and combustibles from around 

the pump motor.

£

 Make sure all wiring connections are clean and 

that all wiring and electrical equipment is in good 
condition. Damaged wiring must be repaired or 
replaced by a qualified electrician as soon as damage 
is discovered.

£

 Check water balance and sanitiser levels at your 

local pool shop.

Summary of Contents for H83SP













Reviews: