S320 User Guide
PN 875-0281-000 Rev C2
Chapter 3: Setup and Configuration______________________________________________________________
Changing Module Status
You change module status by using the Select button to select the module and the Power button
to change the module status.
To change module status:
1.
Press the
Select
button to display the status of all modules (if the LED is on, the
module is on; if the LED is off, the module is off).
2.
Press the
Select
button again to select the first module (UHF/GSM).
Note:
When you press the Select button
the LED (for the module status you are
changing) remains illuminated for 5 seconds, during which time you can use the Power
button to change the module status in step 3.
3.
If you want to change the current
module’s
status, press the
Power
button.
Note:
When you press the Power button the LED
(for the module status you are
changing)
blinks 5 times to indicate a status change.
Repeat steps 2 and 3 for each remaining module (if desired). After a status change, the
function of the LEDs return to normal mode