P306/P307 Integrator’s Guide
Chapter 2: Board Overview
Page 10 of 39
P306/P307 OEM Board Key Features
With its small form factor, low power consumption, and simple on-board firmware, the
P306/P307 is an ideal solution for integrators, offering scalability and expandability from L1
GNSS with SBAS to L1/L2 GNSS, GLONASS BeiDou and Galileo (with RTK capability).
P306 is a drop-in replacement for Hemisphere GNSS’ Crescent® and mini
Eclipse receivers (34-pin) and provides Atlas support with the optional
Hemisphere GNSS LX-3™ OEM board
P307 has a mechanical design compatible with popular after-market products
(20-pin)
The reliable positioning performance of P306/P307 is further enhanced through Eclipse RTK
and COAST DGPS technology.
With P306/P307, RTK performance is scalable. Utilize the same centimeter-level accuracy
in either L1-only mode, or employ the full performance of fast RTK performance over long
distances with L1/L2 GNSS signals. Hemisphere GNSS’ SureTrack technology provides
peace-of-mind knowing the RTK rover is making use of every satellite it is tracking. Even
satellites not tracked at the base benefit from fewer RTK dropouts in congested
environments, faster reacquisition, and more robust solutions due to better cycle slip
detection.
Patented COAST software enables select Hemisphere GNSS receivers to utilize aging
DGPS correction data during times of interference, signal blockage, and weak signal. The
receiver will coast and continue to maintain sub-meter positioning for 40 minutes or more
without a DGPS signal.
Summary of Contents for P306
Page 44: ......
