Hema HN6 Quick Start Manual Download Page 93

Page: 93 / 152

HN6 Quick Start Guide

In some cases, there will be a secondary manoeuvre required a very short distance
after the upcoming one. In this case

iGo

will display a secondary (smaller) icon to the

right of the main indicator, as shown above.

The

Quick Menu button

will take you to the Quick Menu.

The lower-right of the map screen contains a group of info panels. You can tap these

to toggle between a single panel and a three panel view.

Where there are three panels displayed, whichever panel you tap on will become the

single panel displayed.

i.e. If

Distance

Time Left

and

Arrival Time

are displayed, and you tap on the

Distance panel, the display will change to a single panel with the

Distance

displayed.

The contents of the three panels can be customised in the

Settings > Visual

Guidance > Data Fields

section, or by tapping and holding the stylus down for a

short period of time.

Summary of Contents for HN6

























































































































































Search results

Summary of Contents for HN6

Reviews:

Related manuals for HN6

Brands by name

Popular brands

Hema HN6, Quick Start Manual

Search results

Summary of Contents for HN6

Reviews:

Related manuals for HN6

Brands by name

Popular brands