Hema HN6, Quick Start Manual

Page: 119 / 152

HN6 Quick Start Guide
113
 New Route - Create a new route to that place, which supersedes your original
route.
 Waypoint - Add the POI to your route as a waypoint, keeping the original route
final destination.
 Final Destination - Add the POI as the final destination for your current route.
In this case, the original destination becomes a waypoint along the new route.
NOTE
You can also search for a specific CAMPS 6 POI ID at this point, but you
MUST specify the ID in FULL.
i.e. QLD650.
Enter the CAMPS 6 POI ID and hit the Done button .
The Places Found screen will show only the CAMPS 6 ID which you searched for,
and you can perform the same functions as shown in the previous section, such as
setting the POI as your new destination, etc.