3.0
INTRODUCTION
This manual was edited to give some indications on the operation of the welder and was thought to
offer information for its practical and secure use. Its purpose is not teach welding techniques. All
given suggestions are indicative and intended to be only guide lines.
To ensure that your welder is in good conditions, inspect it carefully when you remove it from its packing
having care to ascertain that the cabinet or the stocked accessories are not damaged.
Your welder is capable of daily activity of construction and reparation. Its simplicity and versatility and
its excelling welding characteristic are granted by the inverter technology. This welding inverter allows to
be finely set to obtain optimal arc characteristics with a reduced consumption of energy with respect to
the welders based on a traditional transformer.
Respect the duty cycle of the welder making reference to the technical data label on the welder’s back.
Duty cycle is given as percentage on a 10 minute time. During this period of time the unit can be used
at a defined power regulation. Duty cycle exceeding may cause overheating or welder’s damage.
Welder’s basic specifications:
Power Voltage:
220/240V, 50/60Hz
Uo:
10÷25V MIG/MAG - 38V MMA/TIG
Current Output Range:
25÷170 MIG/MAG - 5÷170 MMA/TIG
Duty Cycle:
25% 170A MIG/MAG - 25% 170A MMA/TIG
100% 85A MIG/MAG - 100% 85A MMA/TIG
Welding Wire Selection:
This welder can work with Aluminium wire 0,8÷1,0 thick, solid steel wire 0,6÷1,0 thick and stainless steel
wire 0,8÷1,0 thick (Gas Welding) and with flux core wires 0,8÷1,0 thick (No Gas Welding).
Feed Rolls:
grrove 0,6-0,8mm for wires 0,6÷0,8mm
groove 1,0-1,2mm for wires 1,0mm
Teflon feed rolls for Aluminium, groove 0,8-1,0mm
Gas Selection
According to the material to be welded and to the wire you are going to use select the protection gas.
The here below table can give you some useful indications:
MATERIAL TO WELD
GAS CYLINDER
WIRE
Mild steel
Argon + CO
2
cylinder or CO
2
cylinder
Copper coated mild steel wire spool.
For no gas welding use
flux-cored wire spool
Stainless steel
Argon cylinder
Stainless steel wire spool.
Aluminium
Argon cylinder
Aluminium wire spool
17
-ENGLISH-
