Helvei Smartmove Longboard, User Manual

Page: 5 / 52

EN
5
USE OF REMOTE CONTROL TO DRIVER
SKATEBOARD
1. POWER ON: Press POWER button 3 sec -
onds to start remote controller, and press POW -
ER button on skateboard to start skateboard;
2. CODE MATCHING: Match code and make
sure remote controller is connected with skate -
board;
3. SPEED MODE SELECT: Power OFF then
power ON, press Button n.1 shortly to select the
speed mode you prefer in LED indicator n.3 and
n.4: button n.3 in green stands for LOW SPEED
mode, which is good for beginner; button n.3 in
red stands for HIGH SPEED mode, which can
be selected by experienced user.
It is highly recommended for beginner to use
LOW SPEED mode only for safety.
4. SPEED CONTROL: Push driving stick n.2 for -
ward to drive forward, push driving sticker n.2
backward to brake skateboard, leave stick n.2
without push will get the skateboard slowing
down slowly at a controllable speed. Push driv -
ing stick n.2 forward to the end will help to accel -
erate fast, loosen driving stick n.2 backward will
reduce speed, push driving stick n.2 backward
to the end will brake the skateboard. Please try
to avoid urgent brake to avoid accident.
5. Direction shift: The skateboard is designed
with dual direction mode. In working status,
press power button n.1 shortly to shift in differ -
ent driving direction, one press stands for one
direction shift.
6. LED indicator Indicators n. 5. 6. 7. give battery
capacity indication to the skateboard. Indicator
n. 5. 6. 7. all on stands for full battery capacity,
indicator n. 6. 7. stands for half battery capacity,
indicator n. 7. stands for low battery capacity be -
low 30%. Indicator n. 7. flashing stands for low
battery of the skateboard. Indicator n. 7. slow
shine (slowly shines and slowly fades) stands