Helmholz CAN 300 PRO, Startup Manual

Page: 13 / 33

3.2 Setting the master
Select the “Master” line in the left-hand field.
Manual: Section 6.4.1

Set the node ID of the master to address 127

Set the baud rate to the preset baud rate of your CANopen
®
device

The synchronous signal and master heartbeat should be
activated and initially set to the suggested times

The options in the Start-up behavior group box can be retained

Set the PLC I/O buffer as described above; matching parameters
will be set for the Step 7 data handling modules later
Leave the remaining parameters as they are already set.
Start-up Guide CAN 300 PRO 13