The next step is to set the addresses of the inputs and outputs of
the CAN 300 PRO in the PLC.
The I/O addresses
should
not
be in the
cyclic process image!
The “Basic parameters” tab card has not function with the CAN
300 PRO.
2.3
Connecting to the PC
Connect a USB cable to the CAN 300 PRO and connect it to your
PC.
Manual: Section 6.2
If you are connecting the CAN 300 PRO to your PC for the first
time, the USB driver will be installed. This is located on the CAN-
CD.
10
Start-up Guide CAN 300 PRO
Summary of Contents for CAN 300 PRO
Page 2: ......
