22.
The sway bar has three end link mounting holes. The end link MUST be mounted
on the outer hole for initial use. SEE PHOTO 7. For a firmer setting, use the inner
holes. You must use the outer mounting hole as shown in photo 7 until you are ac-
customed to the vehicles new handling characteristics. After driving vehicle, a
firmer setting may be selected if desired. It is recommended that the outer hole
be used for street driving.
ATTENTION INSTALLER: BE SURE THAT THE CUSTOMER RECEIVES THIS
INSTRUCTION SHEET, ALL IMORTANT NOTE
CARDS AND THE WARRANTY FORM
559-734-7451 800-367-5480 FAX 559-734-7460
7694 (R-7694)
01/09/2012