ALARM 2 SETTING
Repeat steps 1 to 4 in “ALARM 1 SETTING” to set your desired ALARM 2 wake up time.
NOTE: Be sure to observe the PM indicator to make sure that the time is set correctly for
AM or PM. If the PM indicator is ‘On’, the time displayed is “PM”. If the PM indicator
is ‘Off, the time displayed is “AM “. It is important that the “AM” or “PM” setting is
correct for proper operation of the Alarm function.
TURNING ON ALARM 1 AND/OR ALARM 2
1. Press and hold the
al1/al2
on/off
button for 3 seconds until “ALARM 1” icon appears in
the upper right-hand side of the LCD indicating ALARM 1 function is activated.
2. Press and hold the
al1/al2 on/off
button for 3 seconds the second time until ALARM
2 icon appears in the upper right-hand side of the LCD. ALARM 1 icon disappears.
ALARM 2 function is activated.
3. Press and hold the
al1/al2 on/off
button for 3 seconds the third time until ALARM 1
icon reappears in the upper right-hand side of the LCD. Both ALARM functions are
activated.
TURNING OFF ALARM 1 AND ALARM 2
With both the ALARM 1 & 2 icons are shown in the LCD, press and hold the
al1/al2 on/off
button for 3 seconds until the ALARM 1 & 2 icons disappear in the LCD.
WAKE TO CD, RADIO OR BUZZER ALARM
1. Set your desired wake up time and turn ALARM 1
and/or ALARM 2 on.
2. Set the
function selector
to CD or RADIO if you
want to be waken up by music.
3. Press
power
to turn on the unit.
4. Adjust
volume
for desired listening level.
5. Press
power again
to turn off the unit.
6. If you choose BUZZER alarm no volume adjustment is required.
7. The radio will turn on at the preset “Alarm Time” and play for about 1 hour before turning
off automatically.
8. If you want to turn the unit off, press the
al1/al2 on/off
button. The radio will turn on
again automatically at the preset alarm time (s) on the following days.
9. If you do not want the alarm to turn the on the radio following days follow the steps in
TURNING OFF ALARM 1 AND ALARM 2 to turn off the ALARM function.
ALARM 1 SETTING
1. Press and hold the
al1/al 2 on/off
button until “
ALARM 1
” icon appears in the LCD.
2. Press and hold the
alarm set
button.
3. Press
min
. to adjust the minute and
hr
to adjust the hour.
4. Release the
al1/al 2 on/off
button when your desired wake up time is shown in the
LCD.
8
9
SNOOZE OPERATION
1. When the alarm sounds (BUZZER, RADIO or CD), you can press the
SNOOZE BUTTON
to extend the alarm time by 7 minutes. The BUZZER, RADIO or CD will then turn on
again in 7 minutes.
2. This is repeated until the
al1/al2 on/off
button is pressed.
VIEWING THE ALARM TIME
1. With ALARM1 Icon showing in the LCD, press
alarm set
, the wake up time set in
ALARM1 will be displayed.
2. With ALARM2 Icon showing in the LCD, press
alarm set
, the wake up time set in
ALARM2 will be displayed.
SLEEP TO MUSIC
You can program the sleep timer to play the radio for up to 1 hour 59 minutes and then shut
off automatically.
1. Slide the
function
selector to either “CD” or “RADIO” position.
2. Press the
sleep
button. The display will briefly show “0: 59”. While holding the
sleep
button press the
hr
button, the display shows “1: 59” and the unit will begin to play. After
1 hour 59 minutes the radio will shut off automatically.
3. To adjust the amount of time that the radio will play before shutting off, hold the
sleep
button then press
min
(Minute) button to adjust the desired sleep time. When the desired
amount of sleep time appears on the display, release the buttons.
4. To cancel the sleep timer before it counts down to “00” and shuts the radio “off”, press
the
al1/al2 on/off
button.
SLEEP AND WAKE TO MUSIC
1. Follow steps 1 to 6 in “WAKE TO CD, RADIO or BUZZER ALARM” to set your wake up
time and Alarm sound.
2. Follow steps 1 to 3 in “SLEEP TO MUSIC” above to set your music source and your
desired sleep time.
3. The unit is now programmed to turn off automatically at the Sleep Time you selected and
then to turn on again at the preset “Alarm Time”.
4. To cancel the sleep timer before it counts down to “00” and shuts the radio “off”, press
the
al1/al2 on/off
button.
IMPORTANT
:
Remember that the CD, radio station and volume settings you choose for the SLEEP TO
MUSIC operation are the same settings you will hear if you set the alarm for wake to CD or
radio the following morning.
