62
63
63
7
Maintenance
7.5 Cleaning Cutter/Perforation Cutter and Replace Blades
!
Warning!
Disconnect printer from electrical outlet to prevent accidental
blade movement.
!
Warning!
Risk of injury! The cutter blades are sharp!
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
Clean the drive roller and the cutter blades often.
1
2
3
4
Fig. 20
Dismount Cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (3) from the cover (4).
3.
If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.
