Safety instructions
• Please read the operating instructions carefully before using the ShrinkPad.
• The tool must only be used in technically perfect condition in accordance with its designated use and the
instructions set out in the operating manual, and only by safety-conscious persons who are fully aware of the
risks involved in operating the tool.
• The processing tool can be dangerous, if not properly used.
• Please ensure the tool is disconnected from the mains power source before connecting or disconnecting
any cables.
• To reduce the risk of electric shock; do not expose to rain or moisture. Store indoors.
• Ensure the tool is used in a well ventilated area.
• Do not operate the processing tool in explosive environments, e.g. in areas where flammable gases or dusts
may occur.
• There are heating elements located on the machine, use caution during operation. DO NOT TOUCH
THE HEATING PADS potential hot surfaces!
• The manufacturer is not liable for any damage or claims resulting from unauthorized changes to the tool.
• Do not attempt any repairs or remove any of the safety devices fitted on the tool.
• Repairs should only be undertaken by the manufacturer or a qualified technician.
Shrink Pad 110
Electrical hazard
Connect the tool to a correctly installed electrical socket in accordance with the technical specifications listed in this
document.
Make sure that the socket is easily accessible, so that if necessary the processing tool can be switched off.
Unplug the power cord cable from the socket when you clean the processing tool or want to perform maintenance work.
Air Pressure Hazard
Connect the tool to a correctly installed compressed air connection in accordance with the technical specifications listed
in this document.
Make sure that the air pressure connection is easily accessible, so that if necessary the processing tool can be depressurized.
Unplug the air pressure connection when you clean the processing tool or want to perform maintenance work.
