5
4. Before using the ice maker for the first time, please wait 2 after positioning it. Please keep the front lid
open for at least 2 hours.
5. Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6. Pure water is not allowed to be used on this unit, spring water is recommended.
7.
Make sure the silicon stopper is well inserted.
OPERATING INSTRUCTIONS
1. Open the lid and add appropriate water into water reservoir.
2. Connect to the power.
3. Press
ON/OFF
button to turn unit on. The ice maker begins to work.
4. If indicator
ADD WATER
is red with one beeping noise, then take out the ice basket and add water as
per step 1.
5. If indicator
ICE FULL
is red with two beeping noise, please take out the ice with the scoop.
6. Press
ON/OFF
button to stop the machine.
NOTE:
The ice may be small and irregular in size for the first three cycles.
When the ice basket is full please remove the ice immediately, do not allow the ice basket to overfill.
CARE & CLEANING
1. Clean the inner lining, ice basket, water reservoir, ice shovel and evaporator frequently. Before commencing
any cleaning, unplug the unit and remove any ice cubes. Use a diluted solution of water and vinegar to clean
the inside and the outside surface of the Ice Maker. Do not spray Ice Maker with chemicals or diluted agents
such as acids, gasoline or oil. Rinse thoroughly before starting.
2. Keep any ventilation openings of the appliance enclosure, or in the built-in structure, clear of obstruction. Do
not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3. If the ice maker is reused after a long period of time, the water pump may not pump sufficient water due to an
NOTE: Make sure the water level in the water reservoir is not over the ice collecting tray.
NOTE: For the first three cycles, the ice may be small or irregular in size.
NOTE: If no water is pumped up to the water tray over two cycles but the water in water tank is
enough then please move the unit ahead a little, then remove the silicon stopper, and let
several drops water run out.
NOTE: When the ice collecting tray is full, please remove the ice immediately. Do not allow the
ice collecting tray to overfill.
