4
CONTROL PANEL OPERATION
Press it to turn unit on or off.
This light will come on with a long “beep” noise. You will need to add water and press
the ‘ON/OFF’ button to restart the Ice maker.
This light will come on with a
“beep, beep” noise when the ice has reached the
maximum capacity of the storage cabinet. Press ON/OFF button to restart the ice maker
after some of the ice has been taken away.
BEFORE FIRST USE
1. During transportation, the incline angle of the cabinet should not be over 45° degrees. Do not turn the
ice maker upside down. As this may damage the compressor and sealed system.
2. Remove all packaging material, and carefully check your ice maker to ensure it is in good condition,
and that there is no damage to the ice maker or power cord and plug.
3. The ice maker should be placed horizontally on a level surface. To ensure proper ventilation for your
ice maker allow 150mm of space at the top, the back and on each side. Do not install the ice maker
near an oven, radiator or any other heat source.
