•
Your appliance must be switched OFF via the main power supply and unplugged, and allow it to cool
down before proceeding with any cleaning, assembling or disassembling.
•
Remove any water which is left over in the water tank. Take the appliance outside and remove the
drain plug in the rear of the unit. Water will pout out from the bottom of the appliance. Replace the
drain plug when empty.
•
Be careful not to tip or knock the appliance over.
•
Clean the air cooler regularly especially the rear air inlet filter. Do not allow this filter to become
blocked. This can be cleaned by using a vacuum cleaner hose with a brush attachment. Ensure the
mesh is dry before vacuuming. Alternatively, the mesh can be removed for washing. To do this,
loosen the screw and then pull the mesh out. Wash using a soft damp cloth or rag and mild
detergent, then wipe dry. Refit the mesh and clip it securely into place.
•
Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
•
We recommended lightly running a vacuum cleaner brush nozzle over the louvers to remove any
dust or dirt that may have accumulated.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the appliance.
•
Never immerse the appliance in water.
STORAGE
•
Your appliance must be switched OFF via the main power supply and unplugged and allow it to cool
down before proceeding with any cleaning, assembling or disassembling.
•
Ensure all water is removed from the appliance. Allow the unit to run for 1-2 hours without water so
it dries quicker. More time may be required depending on how humid the ambient air is.
•
Coil the power cord loosely and place it next to the unit.
•
Remove the batteries from the remote control.
•
When the appliance is totally dry, store in a dry well-ventilated area.
