CAUTION:
•
Select a suitable location for the fan. Always choose a safe location in accordance to the
safely recommendations outlined.
•
Ensure the cap on the Water drainage outlet of the unit is tight. Pour clean cold water into
the water filler area, observing the water level indicator in the bottom front panel.
•
DO NOT SPILL OR ALLOW WATER TO COME IN CONTACT WITH THE CONTROL PANEL.
•
Do not overfill past the MAX water line.
•
Do not pour water into the ice tank.
•
Do not allow the combined use of water and ice to overfill the water reservoir.
•
When moving the unit, do so with extreme caution; do not spill any water in the reservoir.
The unit should be moved slowly and in a sideways direction.
•
Always keep the unit upright.
NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.
OPERATING INSTRUCTIONS
A.
ON/OFF
-
Insert the power plug into a power point and switch on. The ON/OFF indicator light will illuminate.
-
Press the ‘ON/OFF’ button on the control panel (or remote control). The unit will start in the default
“LOW” speed as indicated by the indicator light and Normal Mode.
B.
MODE: There are 3 mode functions, Normal, Nature or Sleep.
•
Normal mode: Constant air flow and can be adjust via pressing the SPEED function button.
Example:
Normal LOW or Normal High or Normal Medium.
•
Nature mode:
The “Nature” variable speed wind mode automatically selects one of three variable
speed wind speed patterns. Each pattern produces a different wind pattern depending on the speed
setting selected. Nature mode can be operating HIGH or MEDIUM or LOW speed.
•
Sleep Mode:
The “Sleep” variable speed window allows you to set the product so that the wind
speed will decrease gradually from a high speed to low (depending on the original fan speed selected
by the user).
The variable speed wind speed will simulate the flow of an evening breeze slowing to a light variable
speed night breeze.
The pre-set programming for each setting is as follows:
➢
If the fan speed control is set to “High”, the appliance will start will the High Nature variable speed
wind setting.
➢
The air
flow will remain on “High Nature” variable speed wind for approximately half an hour, the
drop to “Med Nature” variable speed wind for approximately half an hour and finally drop to “Low
Nature” variable speed wind unit it is manually turned off or the tim
er setting is finished.
➢
If the fan speed control is set to “Mid”, the appliance will start with the “Mid Nature” variable speed
wind setting. The airflow will remain on the mid setting for approximately half an hour, the finally
drop to “Low Nature” variab
le speed wind until it is manually turned off or the timer setting is
finished.
➢
If the fan speed control is set to “Low”, the appliance will remain on the “Low Nature” variable
speed wind setting continuously until it is manually turned off or the timer setting is finished.
