Working with the CSC-Tool
CSC-Tool
Precondition for the Use of the CSC-Tool
3 Working with the CSC-Tool
The following steps are necessary to work with the CSC-Tool:
1. Place the CSC Panel in front of the vehicle.
2. Place the CSC Panel centred in front of the vehicle.
3. Place the CSC Panel parallel to the vehicle.
4. Adjust the height of the reference panel.
The individual steps are described below.
3.1
Precondition for the Use of the CSC-Tool
Regard the following in order to use the CSC-Tool:
• Vehicle system is working properly.
• No trouble codes stored in ECU memories.
• Possible vehicle-specific preparations done.
• Rear axle track properly adjusted.
3.2
Placing the CSC Panel in Front of the Vehicle
Proceed as follows to place the CSC Panel in front of the vehicle:
1. Connect the diagnostic tool to the vehicle (see user manual).
2. Select
>Diagnostics<
in the main menu.
3. Select the system to be calibrated, e.g. front camera or ACC under
>Basic setting<
.
A window with information and instructions appears.
14
