Product Description
CSC-Tool
Tool Description
Designation
1
Output of the laser beam/laser beam
Output for laser beam.
Use the laser beam to read the actual value at the scales of
the cross member and at the HD-10 EasyTouch.
2
Mounting bolt
Use this to adjust and secure the laser module.
3
Switch
Switch the laser on and off.
4
Battery compartment cover
2 type AA batteries can be inserted into the battery
compartment.
2.3.4
Replacing the Batteries
Replacing the Type AA Batteries
Proceed as follows to replace the batteries:
1. Switch off the laser beam (1) with the switch (3).
2. Remove the battery compartment cover (4), tilting it from the bottom
side towards the top.
12
