43
The limited warranty comply with legal regulations.
Failures or damages caused by overload or im-
proper use are not covered by the warranty. Please
return the defective product only with a valid proof
of purchase and a detailed malfunction description.
Technical specifications are subject to change!
Errors are reserved! For damages on the vehicle
and the device, caused by handling errors of the
device, we can’t assume liability. This product is
tagged with a CE-Certifikation mark. Thereby these
devices are certified for the use in vehicles within
the European Community (EC).
Technical Data
Warranty Disclaimer
Note:
“The
Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.”
Power RMS
≤
1% THD+N
- @ 4 Ohms ........................................................................75 Watts per channel
- @ 2 Ohms ........................................................................120 Watts per channel
Max. output power per channel* .........................................Up to 160 Watts RMS @ 2 Ohms
Amplifier technology
...........................................................Pure Class GD
Inputs .................................................................................. 6 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In
Input sensitivity ................................................................... RCA / Cinch max. 4 V or max. 8 V
Highlevel max. 16 V or max. 32 V
Input impedance RCA/ Cinch .............................................12 kOhms
Input impedance highlevel ..................................................9 - 33 Ohms oder 20 kOhms
Outputs ............................................................................... 8 x Speaker output
2 x RCA / Cinch
2 x Remote Out
Output voltage RCA / Cinch................................................3 Volts RMS
Frequency response ...........................................................20 Hz - 22,000 Hz
DSP resolution ....................................................................64 Bit
DSP power .........................................................................295 MHz (1.2 billion MAC operations/second)
Sampling rate .....................................................................48 kHz
DSP type ............................................................................Audio signal processor
Signal converters ................................................................ A/D: AKM 32 Bit
D/A: AKM 32 Bit
Signal-to-noise ratio digital input ........................................107 dB (A-weighted)
Signal-to-noise ratio analog input .......................................102 dB (A-weighted)
Distortion (THD) ..................................................................< 0.015 %
Damping factor ...................................................................> 70
Operating voltage ...............................................................10.5 - 16 Volt (max. 5 sec. down to 6 Volts)
Idle current..........................................................................540 mA
Max. remote output voltage ................................................500 mA
Fuse....................................................................................2 x 30 A LP-Mini-Fuse (APS)
Additional features .............................................................. HEC slot, ADEP.3 circuit, Control Input, 32 Bit
CoProcessor, Auto Remote switch
Dimensions (H x W x D) .....................................................
44 x 220 x 180 mm / 1.73 x 8.66 x 7.09”
* In typical multi-channel applications (2- / 3-way re ar + subwoofer)