HELIX HLT3000, Assembly Manual

Page: 6 / 24

Instructions to change display standards
To change the computer on the Helix HLT3500 from either Metric to Standard
(English) or Standard (English) to Metric, please follow the instructions below
carefully.
Please note the computer must be completely off when starting this
procedure. If you are unsure if the computer is completely off please let the
machine sit for 5 minutes before starting OR remove a battery and reinstall.
Language Change Steps:
Choices English, French, Spanish, German
1. Press and hold both the “Quick Start” and “Clear” keys then make at
least one pedal revolution to start the console. This will put the console
into engineering mode.
2. Press together and hold both the “Quick Start” and “UP” keys until the
console goes into Language mode.
3. Use the “Up” and “Down” keys to scroll the language.
4. When correct Language is selected, press the Enter key for minimum of
3 seconds to lock in the selection.
Standard or Metric Display Change Steps:
Choices Standard (Miles) , Metric (Kilometers)
1. Press and hold both the “Quick Start” and “Clear” keys then make at
least one pedal revolution to start the console. This will put the console
into engineering mode.
2. Use the up and down keys to scroll to choose Metric or Standard.
3. Press the Enter key for at least 3 seconds to lock in the selection and
exit Engineering Mode.
2/ CHANGING DISPLAY STANDARDS: ENGLISH/METRIC
- 6 -
A5-HLT3500.indd 6 14/12/2012 19:48