Helios PD2-6400 High Voltage & High Current Meter
Instruction Manual
36
Scaling the 4-20 mA Analog
Output (
Aout
)
The 4-20 mA analog output can be scaled to provide
a 4-20 mA signal for any display range selected. To
select the channel and source assignments the
analog output are assigned to, see
No equipment is needed to scale the analog output;
simply program the display values to the
corresponding mA output signal.
The
Analog Output
menu is used to program the 4-20
mA outputs based on display values.
For instructions on how to program numeric values
Reset Menu (
reset
)
The
Reset
menu is used to reset the maximum or
minimum reading (peak or valley) reached by the
process; both may be reset at the same time by
selecting “reset high & low” (
rst HL
).
Manual Control Menu (
Contrl
)
The
Manual
Control
menu is used to control the
4-20 mA analog output and the relays manually,
ignoring the input. Each relay and analog output can
be programmed independently for manual control.
Selecting automatic control sets all relays and analog
output for automatic operation.
