EN
D
10
MultiZoneBox - KWL-MZB
Installation and Operating Instructions
EN
Unit
Click on the “
Unit
” button, this will open the following submenu.
Unit name
“
Unit name
” you can enter a name, e.g. Apartment 3, Maier or similar here.
Unit info
“
Unit info
” you can enter further unit information, e.g. Building 1 here.
Unit address
“
Unit address
” you can enter a number between 1 and 255 here (only required for control via the KWL MZB ZR).
Control element
“
Control element
” you can select which control element (optional accessories) you have connected here (default “No
control element”).
Function Switch contact
“
Function Switch contact
” is used for special functions such as the detection of e.g. collective alarms (“Deactivated”
as standard).
Ventilation
Click on the “
Ventilation
” button, this will open the following submenu.
Minimum ventilation level
“
Minimum ventilation level
” you can determine whether the MZB completely closes the air shutter or runs at least on
basic ventilation here.
Basic ventilation
“
Basic ventilation
” you can enter the calculated basic ventilation volume flow here (ventilation for moisture protecti-
on).
Ventilation level 1
“
Ventilation level 1
” you enter the calculated reduced ventilation value here.
Ventilation level 2
“
Ventilation level 2
” you enter the calculated nominal ventilation value here.
Fig .19
Fig .20
