Helios KWL 170 W, Installation And Operating Instructions Manual

Page: 54 / 100

Central ventilation unit – KWL 170 W/W ET
Installation and Operating Instructions
EN EN
21
2. Enter the following values for the fan powers in the respective ventilation profile via the easyControls software or the
control element KWL-BE Touch: Away : 30 % / At home : 50 % / Boost : 80 % (cf. Fig. 33).
3. Select the individual ventilation profiles (At home, Away, Boost) one after the other and measure the static differential
pressure between extract and exhaust air and supply and intake air respectively.
4. Enter the determined differential pressures from the supply and intake air measurement in the unit characteristic
curve for supply air (see Fig. 28 and Fig. 30) according to the fan outputs saved in the ventilation profile (cf. Fig. 33
and Fig. 34).
5. Enter the determined differential pressures from the extract and exhaust air measurement in the unit characteristic
curve for extract air (see Fig. 29 and Fig. 31) according to the fan outputs saved in the ventilation profile (cf. Fig. 33
and Fig. 34).
6. If individual measuring points are connected, the system characteristic curve is for supply or extract air (cf. Fig. 35).
Fig. 33
V· m 3 /h
D p
f a
Pa
â
10 %
ê
20 %
ô
30 %
û
40 %
á
50 %
é
60 %
ó
70 %
ú 80 %
à
90 %
è
100 %
ô
â
û
ê
á
ó
ú
à
é
è
Fig. 34
V· m
3
/h
D
p
f a
Pa
â
10 %
ê
20 %
ô
30 %
û
40
%
á
50 %
é
60 %
ó
70 %
ú
80 %
à
90 %
è
100 %
ô
â
û
ê
á
ó
ú
à
é
è
Fig. 35