Helios 8111, Installation And Operating Instructions Manual

Page: 26 / 48

1.0 Type overview of flush-mounted casing
1.1 ELS accessories
CHAPTER 1
ELS QUICK OVERVIEW
2
Casing type ELS-GU
Installation and Operating Instructions
ELS-GU
Flush-mounted casing
Plastic
Ref. no. 8111
PAGE 5
ELS-ZAS
Second room connection
spigots
required if ELS-ZS is not used.
DN 75/80
Ref. no. 8184
PAGE 8
ELS-ZNE
Electronic overrun timer
with variable overrun times
Installation: Flush-mounted
box behind switch
Ref. no. 0342
PAGE 16
ELS-ZNI
Electronic interval timer
with adjustable interval and
overrun times
Installation: Flush-mounted
box behind switch
Ref. no. 0343
PAGE 16
ELS-ARS
Conversion kit for moun-
ting in ELS-V...
discharge
to back, consisting of guide
plate and 4 plastic rivets for
metal nozzles.
Ref. no. 8185
PAGE 7
ELS-VA
Plasterboard adapter , for
retrospective installation in
plasterboard
Ref. no. 8189
PAGE 12
ELS-WCS
WC extraction kit , consis-
ting of 90° bend with DN 50,
reduction DN 40 and 30.
Ref. no. 8191
PAGE 8
ELS-ZS
Second room kit ,
consisting of spigots for sec-
ond room connection, extract-
ion unit and foil insert
( 1) for
air regulation.
Ref. no. 8186
PAGE 8
ELS-MHU
Mounting bracket ,
flush-mounted for fixing
casing to wall or ceiling.
Ref. no. 8187
PAGE 9
ELS-MB
Mounting holder
, for plas-
terboard and flush-mounted
installation. Can be used for
all common plasterboard
systems
Ref. no. 8188
PAGE 10
External switches ZNE/ZNI must only be used for sing-
le-speed fans V 60 and V100.
Caution
m
(1)
When using the second room kit
ELS-ZS,
the foil insert must be kept in the flush-mounted box
until final assembly!
NOTE
+
ELS-AGR
Spacer frame , for fixing bet-
ween wall and inner facade,
if the flush-mounted casing
protrudes over the plaster.
Ref. no. 8193
PAGE 12
ELS-PB
Plasterboard cover , for
covering gaps if casing cut-
outs have been uncleanly
plastered/tiled or if they are
too large.
Ref. no. 8194
PAGE 13
EN
ELS-UPA
Flush-mounted spacer
frame
for flush-mounted
casing. Used when ELS-GU
and ELS-GUBA are installed
too deep.
Ref. no. 7332
ELS-APASA
Surface-mounted adapter
with side inlet for ELS-GU
and ELS-GUBA.
Ref. no. 7328
ELS-VSR
Sunken frame
for
flush-mounted wall and
ceiling installation of inner
facade, suitable for ELS-GU
and ELS-GUBA.
Ref. no. 7322