9
VARD / VARW.. – High-Pressure In-Line Duct Fans
Installation and Operating Instructions
UK
4.4 Standstill and disposal
WARNING
When dismantling, live parts can be exposed, which can result in electric shock if touched. Before dismant-
ling, isolate the unit from the mains power supply and protect against being switching on again!
The generally applicable safety at work and accident prevention regulations must be observed!
– Electrical work must only be carried out by an authorised electrician
– Fully isolate electrical connection from mains power supply
– Use appropriate lifting equipment and fastening devices to dismantle the fan
– Observe the instructions in the electric motor maintenance manual for decommissioning the motor
– Dispose of the fan components according to the valid rules and laws.
5.0 Type plate
The product-specific technical data can be found on the type plate. The individual data is described below using an
example.
Standard type plate:
Fan type plate key:
Special type plate:
Fan type plate key:
WARNING
nm
CHAPTER 5
TECHNICAL DATA
q
Manufacturer's address
w
Version:
VARD
= type designation; altern. current
560
= size
/4/4
= pole
e
Item number
r
Series number
t
Fan mark:
CE
= CE mark
y
Technical data
Further data see motor type plate
(attached to fan)
u
Production code
q
Manufacturer's address
w
Fan mark:
CE
= CE mark
e
Version:
VARD
= type designation; altern. current
630
= size
/4
= pole
r
Item number
t
Series number
y
Production code
u
Technical data
i
Corresponding installation instructions
Abb.5
q
w
u
e
y
r
t
i
Abb.6
q
w
e
r
t
y
u
