QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.com
Full manual available to download from: www.Helion-RC.com
PAIRING/BINDING GUIDE
1
Open the receiver box and locate
the receiver pairing button. Having
followed steps 1 to 10, in the
unlikely event that your car does
not operate please follow the 6
stage pairing process detailed
here.
2
Place your Volition XLR and HRS
3.1 transmitter in close proximity
but not less than 12” (300mm)
apart.
3
Switch ON your transmitter, then
switch the vehicle ON. The LED on
the receiver will blink, confirming
that it is not paired with the
transmitter.
4
Switch OFF your HRS-3.1
transmitter. Hold the REV/PAIR
button and turn the power back
ON to put the transmitter into
pairing mode.
5
Press and release the PAIR button
on the receiver and note that
the LED will start to blink faster,
indicating that it is searching for a
transmitter to pair with.
Having followed steps 1 to 10, in the unlikely event that your car does not operate please
follow the 6 stage pairing/binding process detailed here.
300mm
Minimum