20
Turn OFF ESC and
Transmitter
Press and hold the
SET button then
Turn ON the ESC
RED LED flashes
indicating you are in
program mode
GREEN LED flahes
1 time to set Item 1
Program Item 1:
Running Mode
RED LED flashes to indicate
set value: 1-2, press button to
cycle through available values
GREEN LED flahes
2 times to set Item 2
Program Item 2:
Drag Brake Force
Program Item 3:
LVC Threshold
Program Item N:
“Programmable
Item”
RED LED flashes to indicate
set value 1-8, press button to
cycle through available values
RED LED flashes to indicate
set value 1-6, press button to
cycle through available values
RED LED flashes to indicate
set value 1-X, press button to
cycle through available values
GREEN LED flahes
3 times to set Item 3
Continue to cycle through available Programmable Items and set values as desired. We
recommend you start with the default values and adjust only one value at a time to be sure
the change has made the desired effect.
GREEN LED flahes
“N” times to set
Item N
HOLD SET BUTT
ON
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
Tu
rn OFF ESC at an
y time
to
co
nfir
m se
tting, tu
rn ON
again t
o be
gin u
sing the
ne
w se
ttings.
Programmable Items
(Blinks of GREEN LED)
Programmable Value (Blinks of RED LED), Black background indicates default settings
1
2
3
4
5
6
7
8
1. Running Mode
Forward
with Brake
Forward/
Reverse
with Brake
2. Drag Brake Force
0%
5%
10%
15%
20%
25%
30%
40%
3. Low Voltage Cut-Off
Threshold
No
Protection
2.6V/
Cell
2.8V/
Cell
3.0V/
Cell
3.2V/
Cell
3.4V/
Cell
4.
Start Mode/Punch: Higher
value is more aggressive
Level 1
(70%)
Level 2
(80%)
Level 3
(90%)
Level 4
(100%)
5. Maximum Brake Force
25%
50%
75%
100%
Summary of Contents for Avenge 10MT XLR
Page 1: ...Owner s Manual Technical Information ...
Page 38: ...www Helion RC com ...
