5
Glue the wood pieces together according to the
Tighten the wood blocks onto the landing gear position of
the Heli Assembly using four M2x18mm Hex Cap Screws
with 2x5mm washers.
Insert the Heli Assembly into the fuselage.
to the above photo.
Reinstall the tail gear box to the Heli tail boom.
Secure the Heli Assembly onto the bottom plate of the
fuselage using four 2x14mm Self-Tapping Screws.
above photo.(Remarks: the hight of the wood block
is depend on what heli you use.)
Use the sponge collar to hold the heli's tail boom according
7
8
10
9
11
12
Summary of Contents for 500MD
Page 1: ...1 ...
