3
500 scale fuselage is suitable for T-REX 500 Helicopter series
BEFORE ASSEMBLING
1:Check for all parts in the part list shown at bellow.
2:Some basic tools are needed to help the assembly.
TOOL
1:Cutter knife. 2:Hexagon screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue(epoxy) 9:Fine sandpaper.
10:Scissors.
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of
people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of
maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury
happened during the operation or as a result of R/C aircraft models.
1:Plastic Landing Gear x4
9:Washers
￠
2x
￠
5x0.8mm x4
17:Body Uppper Winder cover x2(L & R)
2:Aluminum Skids x2
10:Self-Tapping Screws 2x18mm x4
18:Horizontal Stabilizer x1
3:Set Screw M3x4 x4
11:Sponge Collar x1
19:Vertical Stabilizer x1
4:Self-Tapping Screw 3x10mm x4
12:Self-Tapping Screws 2x14mm x4 20:Small Vertical Stabilizer x2
5:Missile Mounts x2
13:Tail LED Cover x1
21:Self-Tapping Screws 2x5mm x2
6:Missiles x2
14:Head LED Cover x1
22:Washers 2.5x8x0.8mm x2
7:Self-Tapping Screws 2x12mm x4 15:Head Window Covers x2(L & R)
23:Hex Cap Screws M2.5x30mm x2
8:Wood Pieces Set
16:Body Window covers x2(L & R) 24:Antenna x1
Summary of Contents for 500MD
Page 1: ...1 ...
