7
Assemble the Vertical stabilizer to the
fuselage's tail using two 3x20mm Self-Tapping
Screws.
Align the Heli Body to the fuselage and drill
four 3mm holes on the bottom side. Use
M3x25mm screws and washers to secure the
Heli Body to the fuselage.
Use four 2x5mm Self-Tapping screws to secure
the vertical stabilizers.
Glue the Machine Guns onto the gun position
of the fuselage.
Fit the Horizontal stabilizers onto the trough
on the Tail Boom of the fuselage and use
epoxy to secure them. (Remarks: make sure
the Horizontal stabilizers are in perpendicular
condition.)
Stick the Rockets Jane under the kit.
(The Rockets Jane is In addition to buy)
