25
Red blinking
0-20%
Battery discharge on 70%,red lamp will blinking “Energy storage”.
Battery discharge on 80%,two lamp will blinking“ run out of battery” ,Need to charge the
accumulator.
9.4.8 Charging
Read the instruction manual carefully before recharging.
a
）
Must use Li-ion Charger specially designed by our company, Charger
operatingvoltage48V,maximum charge up voltage 54.6v,charging current 3A
b
）
Do not reverse charge the battery
c
）
Stop charging immediately when battery has obvious heat during charging .Then cool
it before charging
d
）
Please hold the handle when pulling charger connector, direct drawing of wire is not
allowed
9.4.9Disassembly and Installation of battery
Parking the truck before the battery is removed and installed
Disassembly & Installation battery step
：
A
：
Turn off the car.
B
：
Pull the power connector handle and unplug the power connector(Attention: When
pulling the power connector, Must hold the handle .Please do not pull the wire directly
C: Pull up the battery and pull the battery out of the car.
D
：
Insert the new battery into the battery mounting solt.
E
：
Plug in the power connector.
