3
600scale fuselge,suitable for T-REX600E/ Nitro Helicopter series
BEFORE ASSEMBLING
1:Check for all the parts in the list come with the manual.
2:Some basic tools are needed to help the assembly.
TOOL
1:Cutter knife. 2:Hexagon screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue (epoxy) 9:Fine sandpaper.
10:Scissors.
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of
people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of
maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury
happened during the operation or as a result of R/C aircraft models.
1:Main Scale Body x1
10:Tail Boom Adapter x1
19:Ball Link x2
2:Main Tail Part x1
11:Plastic Spacer x2
20:Linkage Rod x1
3:Self-Tapping Screws 3x8mm x4 12:Washer
￠
3x
￠
8x0.8mm x4 21:Servo Wood Mount x1
4:Landing Gear x4
13:Hex Cap Screw M3x14mm x4 22:Self-Tapping Screw 2x5mm x4
5:Hex Cap Screws M3x20mm x4
14:M3 Nut x4
23:Horizontal Stabilizer x2
6:Landing Skid Mount x4 15:Tail Gear Box Adapter x1
24:Vertical Stabilier x2
7:Landing Skid x2
16:Hex Cap Screw M3x14mm x2 25:Self-Tapping Screw 2x5mm x4
8:Skid Pipe End Cap x4
17:Washer
￠
3x
￠
8x0.8mm x2 26:Upper Window Cover x1
9:Scorpion Tail Shaft x1 18:Self-Tapping Screw 3x14mm x4
Summary of Contents for 600 Scale Fuselage B0105
Page 1: ...1 ...
