Hekatron Standard X, Operating Manual, Page: 22 / 32

22 | 9. Operation
f Briefly press the red operating
button at the radio module.
Ö Radio commissioning is
terminated.
Ö The smoke alarms stop
signalling.
Ö All users confirmed so far
remain assigned to this line.
f Screw the user back into its base.
9.5 Removing users
from the radio
network
f Remove the desired radio smoke
alarm form the base.
f
Remove the rubber rings from the
connector pins.
f Remove the radio module from
the smoke alarm.
CAUTION
Modifying an existing radio network
may result in incorrect spacing
between the remaining users and
thus in an interruption of the radio
connection.
f
Perform a line test of the
remaining users and make sure
that the users are still within
range of each other.