Hekatron Standard X, Operating Manual, Page: 17 / 32

8. Radio commissioning | 17
8. Radio commissioning
Radio commissioning is carried out
for each line, i.e. each line must be
commissioned separately. If 2 A.0
lines are to be operated in parallel,
2 radio commissioning operations
must be carried out in succession.
This ensures that the lines emit
alarms separately and independently.
Requirements
„
A radio smoke alarm of the line
is ready at hand, but not yet
screwed into the base.
„
All other radio smoke alarms of
this line are completely assembled
and signal their readiness for
commissioning by means of the
running light ( green-orange-red )
on the test button every
8 seconds.
Performing radio commissioning
After the start of commission-
ing, all users of this line
must be confirmed within
15 minutes by pressing the test
button.
f Press and hold the red operating
button on the ready but not yet
mounted smoke alarm for at least
5 seconds until the radio module
LED lights up permanently.
f Release the red operating button.
Ö
The radio module LED con-
tinues to flash for a short
time.
f
Screw the smoke alarm into the
base.
Ö
All smoke alarms of this
line within range will signal
the receipt of the signal for
i