Installation instructions Art. No. 20499,20500
Page 2 of 2
Status 02.2015
Disposal:
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Installation:
The stated loads of the transformer must be neither exceeded nor fallen short of.
This transformer has internal protection against normal voltage surges and interference
voltages. Avoid connecting transformers to the mains network which have high induction
currents or large repeated surge voltages.
The transformer is equipped with an overheating safety device. In case of overheating the
transformer switches off and can no longer be used.
Output lines should be separated and laid at a distance from other lines. The mains
connection lines and the lights lines should not cross over each other.
The ambient temperature and the transformer housing temperature have to be observed (see
rating plate).
Transformers can cause a slight buzzing sound during operations. The output lines have to be
fixed and freed from tension and pressure.
The rating plate on the transformer must not be removed.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
