6.2 Delete macro (MACRO 1 - 3)
You can also delete a previously created macro.
1. Press and hold the SET button for approx. 3 seconds until the system menu appears.
2. Navigate to the MACRO menu item with the help of the
▲
and
▼
keys and press the OK
button.
3. Subsequently select the macro that you want to delete (MACRO1, MACRO2 or MACRO3)
with the help of the
▲
and
▼
keys and press the OK button again.
4. Now press the
▲
and
▼
keys until such time as DELETE appears on the screen. Now press
the OK button. The SURE DELETE message will be shown on the display.
5. If you are sure that you want to delete the macro, press the OK button again. SUCCESS
appears on the display for approx. 1 second, subsequently the menu quits automatically to the
MACRO menu. In order to quit the macro menu, press the EXIT key twice.
7 Configuration (Configure)
This menu enables you to change the preset configurations to your own requirements.
7.1 Setting the time (Time Setup)
This menu enables you to set the time. Once it has been entered, the current time will be shown
on the display of your Universal Remote Control.
1. Press and hold the SET button for approx. 3 seconds until the system menu appears.
2. Navigate with the
▲
and
▼
buttons to the CONFIGURE menu item and subsequently press
the OK button, so that the TIME SETUP menu item is shown on the display. Confirm the menu
item by pressing the OK button again.
3. Now you can enter the current time with numbers 0-9 (12 hour clock). You can toggle the input
field with the
◄
and
►
keys. Please use the keys
▲
and
▼
in order to toggle between AM
(before 12 midday) and PM (after 12 midday).
4. Subsequently confirm your entry with the OK key. SUCCESS appears on the display for
approx. 1 second, subsequently the menu quits automatically to the TIME SETUP menu. In
order to quit the menu, press the EXIT key twice.
