5. Press the desired button on the original remote control (e.g. MUTE) which is to be learned by
the 10000012.
6. If the learning process is successful, SUCCESS appears on the display for 1 second.
Subsequently you can continue learning for additional keys.
Note! Previously learned keys can be overwritten at any time by means of a keyed command on
the original remote control.
7. In the event that FAILED appears on the display or in the event that the waiting time in
learning mode exceeds 20 seconds, the learning process has failed. Please repeat the
learning process from point 4.
Attention! In rare cases it may happen that the keyed command from the original remote control
is not recognised and therefore cannot be learned.
8. In order to quit the learning function menu, press the device selection key (e.g. TV).
Fig. 1
Infrared diodes
5.2 Delete key (Delete Key)
A previously learned key command can be deleted in order to restore the default function of the
key.
1. Use the device selection button (e.g. TV) to select the device for which you intend to delete
the learned key command.
2. Press and hold the LEARN button for approx. 3 seconds.
or
Press and hold the SET button for approx. 3 seconds until the system menu appears.
Navigate to the LEARNING menu item with the help of the
▲
and
▼
keys and press the OK
button.
3. Subsequently select the DELETE KEY menu item with the help of the
▲
and
▼
keys and
press the OK button. The SELECT KEY message is now shown on the display.
4. Press the desired key which has previously been learned and which you intend to delete again
(e.g. MUTE). SURE DELETE appears on the display.
5. If you are sure that you want to delete the selected key, press the OK button. SUCCESS
appears on the display for approx. 1 second. Subsequently you can delete another key.
6. When you are finished with the delete process or you wish you quit the learning function
menu, press the EXIT button.
Now press the respective button on
your original remote control
