7.6 ShowView function (ShowView)
This function offers you a listing of all ShowView programmes which can be received.
Important! You need a ShowView-capable device which supports this function.
1. Switch over to the desired device with the device selection key (e.g. VCR).
2. Point the remote control unit at the device and press the SHOWVIEW button for approx. 1
second.
3. Your ShowView device will now open the ShowView menu and will automatically search for
ShowView programmes. Subsequently you will see a listing of all available ShowView
programmes.
Note! It is important to keep the Universal Remote Control pointed at the device until such time as
the search process is completed.
7.7 Switch off all devices (ALL OFF)
You can switch off all of the active devices at the press of a button.
Point the remote control unit at the device and press the ALL OFF button for approx. 3 seconds.
All of the active devices will now be successively switched off (Stand-by).
Note! It is important to keep the Universal Remote Control pointed at the device until such time as
all of the devices are switched off.
7.8 Factory reset (Clear All)
You can delete all of the previously undertaken settings by resetting the Universal Remote Control
unit to the factory setting.
Attention! Doing so will also reset all of the learned codes, settings and clock.
1. Press and hold the SET button for approx. 3 seconds until the system menu appears.
2. Navigate to the CONFIGURE menu item with the help of the
▲
and
▼
keys and press the OK
button.
3. Subsequently select the CLEAR ALL menu item with the help of the
▲
and
▼
keys and press
the OK button. SURE DELETE appears on the display.
4. If you are sure that you want to reset the Universal Remote Control unit to the factory settings,
press the OK button again. Afterwards the menu quits automatically.
5. If you want to abort the delete process, press the EXIT key, in order to return to the CLEAR
ALL menu. In order to quit the menu, press the EXIT key twice.
